|
| AUX ELECTRICAL CONNECTION FOR IN-CAB CONTROL | For simple in-cab control, the FBS752 comes standard with Baumalight's Auxiliary Electrical Connection. This connection gives you simple quick connections and access to all the attachments functions using your machine's own controls. |
| $0.00 |
| 36" THROAT OPENING | The Feller Buncher has a 36" wide throat opening at the teeth. This allows you to do a nice low cut on trees with a wide root flair. |
| $0.00 |
| OPEN FRAME FOR BETTER VISIBILITY | The upright frame of the FBS752 is open to improve the operator’s visibility while felling trees. |
| $0.00 |
| BENT AXIS PISTON MOTOR | Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs. |
| $0.00 |
| HEAVY DUTY FRAME | Heavy duty frame with T1 alloy tool steel sheet metal for all the main areas. Powder coated frame with multiple anti-slip pads to give you secure footing for ease of entry and exit from your cab. |
| $0.00 |
| BLADE MOUNTED ON HEAVY DUTY BEARING SUPPORT | The saw blade is mounted on an overhung load adapter, which is designed with tapered roller bearings and built to stand up to the rigors of sawing limbs and trees. The overhung load adapter keeps the blade spinning in the toughest trimming conditions. |
| $0.00 |
| SAW BLADE SHIELDING | The durable shield encloses the blade for protection, directing the chips as it easily cuts through trees. Made with AR400 steel, the center log platform plate is designed to support the trees after they are cut. |
| $0.00 |
| CLEAN CUTS WITH B8000 BEAVER TEETH | The FBS752 makes clean work of cutting trees safely and quickly, leaving the trunks and stumps with a clean cut. |
| $0.00 |
| POWDERED COATED | Our powder coat finish is much tougher than conventional paint to stand up to the rigors of forestry and helps prevent rusting. |
| $0.00 |
| HOSE SUPPORT MOUNTED LEFT OR RIGHT | To accommodate for different skidsteers that have the couplers on different sides, the FBS752's hose support can be mounted on the left or right side. |
| $0.00 |
| SPRING LOADED HOSE SUPPORT | Take full advantage of the forward curl and roll back without risking expensive damage to the hoses. The spring loaded hose support prevents the hoses from falling into harm’s way during forward curl. |
| $0.00 |
| CURVED HOSE BRACKET | The new curved host bracket provides better support of the hose while reducing the risk of pinching or chafing. |
| $0.00 |
| ARMOURED AND SLEEVED HOSES | Baumalight hoses are sleeved for the operator and hose protection. A pivoting arm is also standard with a greaseable pin keeping the slack out of the way which protects the hoses from dangerous pinching and strain. |
| $0.00 |
| ROUND EDGES | To protect the hoses from damage, the FBS752 is designed with rounded edges. |
| $0.00 |
| ROUNDED EDGES ON PUSH BAR/FELLER HOOK | To prevent trees from catching, the FBS752 is designed with rounded edges on the push bar so they more easily slid as you push into a leaning tree. |
| $0.00 |
| PRESSURE GAUGE | Unit comes with a large PSI pressure gauge for maintaining the optimal flow, giving you a clear indication of the most efficient performance. |
| $250.00 |
| GRABBER ARMS | The grabber arms have a robust design and are made with AR400 steel. The adjustable swing speed allows the operator better control when grabbing trees. |
| $0.00 |
| BUNCHER ARM | The buncher arm has a shielded spring to protect the spring from damage. The arm is also designed with greaseable pins in all pivot points. |
| $0.00 |
| BOLT-ON SKIS | The skis are bolt-on for easy replacement. |
| $0.00 |
| SERVICE ACCESS | When it comes time to service, the FBS752 is designed with full access to for easier service. |
| $0.00 |
| GREASEABLE PINS | Our grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime. |
| $0.00 |
| HARDENED STEEL BUSHING | Spring Bushings made from high grade chrome-vanadium AISI 6150 spring steel on all main pivot points. |
| $0.00 |